Linksys Wrt54gc Ver 2.0 Firmware Update

Posted on  by admin

4GC Version 2. Firmware Update? Is there any firmware update for this product? I'm not hable to find it. Is there any firmware update for. This article will provide you with detailed instructions on how to upgrade the firmware of your Linksys router. Look for the firmware version of your router on. The version numbers that Cisco puts on their home WiFi routers is in regard to the hardware used. The WRT54G v2 and the WRT54G v3 (and so on) have.

I think this is the first time I will be reviewing a hardware component. I am just happy that I could again share my Internet connection between my desktop and notebook.

I have borrowed a router from my uncle before, but he already took it back for use on their home. I’ve only used that one router other than the WRT54GC that I currently am using.

Since the bigger WRT54G has dual antennas, it has an expectable wider signal range than the compact with only one. It provides a high speed Wi-Fi connection of close to, if not 54 Mbps with the notebook and the access point approximately 15 meters away from each other, while the compact could only provide approximately 11–24 Mbps under the same conditions even though the Windows XP Wireless Network Connection manager usually reports Very Good signal strength. That may be a good compensation for its bulkiness, but I have had problems with the when using the BitTorrent protocol. As answered in the µTorrent FAQ, this router has. Also answered on the above linked FAQ entry is a fix, which includes installing one of two third-party firmwares. Remember that the router wasn’t mine in the first place.

Besides, installing and/or upgrading firmware risks the router being, and add to that the fact the software recommended was made by and wasn’t official. I have been trying to borrow the router from my uncle again, but he came to our house with a instead. Of course, I was surprised, but I still do not know if he will give me this one or sell it to me. I’ve installed it immediately, and I’ve been testing it using with a huge download task and several seeding tasks for three days almost continuously already. The only problem I’ve had with the Compact Wireless-G Broadband Router is its Static DHCP feature, which should take care of Static IP addresses without configuring the client manually. I really want to utilize the said feature for Port Forwarding since I use BitTorrent and it has to have an open port for incoming connections.

The problem is that whenever I place my computer on the list of clients with static IPs, and change the DHCP IP range to something excluding the static IPs, it still gives the client an IP within the DHCP range and not the listed static IP. With the hopes of having no slowdowns like the experience I’ve had during the WRT54G period, I’ve searched for responses from WRT54GC users on various fora.

Thankfully, I’ve found no significant problem other than users trying to get the version 2.0 external antenna to be replaced by a. But I still haven’t encountered an unambiguous response to one question I would have asked myself, so I stopped searching and continued testing. Through the past three days of downloading 6 GiB of data, I’ve encountered minor slowdowns more possibly linked to an ISP issue rather than a router issue. The last two afternoons were probably the best evidences I could offer regarding the performance of this product—the download speed reached 85 kB/s when I was connected to a nearby peer. Therefore, no signs of slowdowns due to high amount of connections were exhibited—a sickness, I may say, about the stock WRT54G/GL/GS. Other features of the Linksys WRT54GC includes among others:.

Linksys wrt54gc ver 2.0Update

Compact and portable design: approximately 4″×4″×1″. 4-port wired Ethernet switch; Wireless Access Point for 802.11b/g devices. High security with WPA/WPA2 Personal, Wireless MAC address filter, SPI firewall. Disclaimer: The above Linksys WRT54GC v2.0 photo was taken from the page without permission. Update note: Photo from the official Linksys Web site was taken down and replaced with my own shot of the router to avoid copyright issues. Footnotes:. Our neighbor two houses away across the street claimed to have received my SSID broadcast.

Wrt54gc

The C in WRT54GC stands for compact; version 1.0 of the compact has no built-in external antenna, only an internal one—I am using a version 2.0. With concrete and wooden walls, and everything else in between. And when I say, using, I mean always. Along with similar routers, WRT54GL and —GS. But, responses to the alternative firmwares were mostly positive. I really, really hope for the former. The question of how it would perform on a lot of connections.

I’m on a 384 kbps connection as advertised, so my theoretical maximum download speed is 46.875 kB/s. Categories, Tags,. Perhaps it’s a dumb question because it’s so obvious, but did you assign your computer a static IP? I mean not on the router, but in your Windows XP network settings? Otherwise your computer will always request a new IP through DHCP. Besides one of the main advantages of the Linksys router is that it runs Linux, hence there are myriads of possibilities to pimp the router with open source firmware. I mean, you can run Asterisk as a VoIP phone server on this little machine or do other fancy things, that’s awesome!

Although you are right that this firmware is provided by “hackers”, thousands of people have tested it and contributed code, thus I consider it rather reliable. Though I must admit I have a Belkin router at home, but colleagues have the Linksys router with the open source firmware.

quote comment=”13427″And when I did try to configure the client itself because the feature won’t work I was disconnected from the router–I cannot anymore access the administration settings from 192.168.1.1 until I configured the client to request an IP address from the DHCP server again./quote The IP has to be in the same IP range as the router, so if the router is 192.168.1.1, the client IP must be something between 192.168.1.2 and 192.168.1.255. If you configure 192.168.0.2 instead it won’t work. Also the Subnet is usually 255.255.255.0 (it must match the router’s setting), and the Gateway is the router’s IP address, i.e. I had been searching for a resolution to the same problem, and reviewed a few FAQ’s on the issue.

I went with manually setting an IP on my machines and they work fine now. Mcafee unlock user interface. Not sure if you needed directions but I figure it’s easier to just list: Open network connections, selecting status of your connection and click properties. Under Internet Protocol TCP/IP change the settings as the IP outside the DHCP settings, and the subnet 255.255.255.0, and your router’s IP (192.168.1.1 on most Linksys). My real problem was that required me to enter a DNS. I’m using RoadRunner so I just contacted them for the DNS values, they told me I could also get them by connecting directly to my modem and opening a cmd using the ipconfig /all prompt. Also, he mentioned something about setting the DNS to the router IP and having the router auto-detect the DNS if I planned on using multiple machines. Hope that helps a little.

Thanks, that may be useful to others, but I’ve already tried that, and I arrived with similar results. I just didn’t continue with configuring the client manually, because the Windows XP TCP/IP Properties dialog requires manual DNS server address settings along with a manual/static IP address configuration—just like what you’ve said—but I wanted automatic DNS server resolution. Besides, I really wanted to utilize the router’s feature since management would be centralized that way. I think the problem was solved anyway when I used a “Static DHCP” IP address within the specified DHCP range—not a usual situation, but the router still doesn’t give other clients the Static IP address registered with the MAC address of my PC.

Any DHCP server (in your case, your router) will always assign a static IP via the clients Media Access Control (MAC) address of your Network Interface Card (NIC). The MAC address is usually showed as a 6-group of 2 digits hex number. Its also called a physical address by some OS’s.

If your WRT54GC router is set up as such Gateway: 192.168.1.1 Subnet mask: 255.255.255.0 DHCP client list: 192.168.1.100 – 192.168.1.149 then you should be able to assign any IP address from 192.168.1.2 – 192.168.1.99 and 192.168.1.150 – 192.168.1.253 Best check with your OS on how to verify your MAC address. Ipconfig /all via command prompt (MS Win) ifconfig -a should do the trick for Linux boxes Once you have set your static IP make sure you check-enable it in the WRT54GC checkbox. There are some cases wherein the Router does ignore the set up static ip for the client and still gives it a dynamic IP. The easiest workaround would be to assign a Static IP directly on the client. Just make sure you have the default gateway correctly set up in the client. The DHCP Server then should respect the direct Static IP request. Hope it helps.

I have one strange problem with my WRT54GC using or not static DHCP.After some random amount of time (hours or days) the PC loses the connection with the router. Then Win Xp SP2 shows the message that there is no connection or it is limited. Everything worked well for years, but in the last weeks this problem appeared. I do not know if has to do with that but in this period I have changed my internet from cable to ADSL. The ADSL seems to be fine and I have not made any major changes in the router except change the connection type to PPPoE. No matter what I do I can not connect to the router (192.168.1.1).

The only solution that I found was to turn the router off disconnecting the power and connecting it again soon afterwards. When I do that everything works fines for some more random amount of time, until it loses the connection again. Somebody knows what is the problem? I coud not find more information about this problem. The same thing here, I have wired my PC running Vista Ultimate to the router (WRT54GC). And I have a laptop with XP Home with wireless connection. They also lose the connection randomly.

My ISP says that this is because there are too many computers on our local network, and are now dividing it. I don’t really think that this could be the problem but who knows 🙂 If it works, I’ll tell you and if anyone has a solution to the problem, please share. The router connects to the Internet via DHCP and I have also enabled DHCP for the PC and the laptop.

Manufacturer: Linksys Hardware Type: Wireless Router (WiFi) Model: WRT54GC Compatibility: Windows XP, Vista, 7, 8, 10 Downloads: 71,138,629 Download Size: 3.4 MB Database Update: Available Using DriverDoc: Optional Offer for DriverDoc by Solvusoft This page contains information about installing the latest Linksys WRT54GC driver downloads using the. Linksys WRT54GC drivers are tiny programs that enable your Wireless Router (WiFi) hardware to communicate with your operating system software. Maintaining updated Linksys WRT54GC software prevents crashes and maximizes hardware and system performance. Using outdated or corrupt Linksys WRT54GC drivers can cause system errors, crashes, and cause your computer or hardware to fail.

Furthermore, installing the wrong Linksys drivers can make these problems even worse. Recommendation: If you are inexperienced with updating Linksys device drivers manually, we highly recommend downloading the. This tool will download and update the correct Linksys WRT54GC driver versions automatically, protecting you against installing the wrong WRT54GC drivers.

Linksys Wrt54gc Ver 2.0 Firmware Update

Solvusoft: Microsoft Gold Certified Company Recognized for best-in-class capabilities as an ISV (Independent Software Vendor) Solvusoft is recognized by Microsoft as a leading Independent Software Vendor, achieving the highest level of completence and excellence in software development. Solvusoft's close relationship with Microsoft as a Gold Certified Partner enables us to provide best-in-class software solutions that are optimized for performance on Windows operating systems. How is the Gold Competency Level Attained? To achieve a Gold competency level, Solvusoft goes through extensive independent analysis that looks for, amongst other qualities, a high level of software expertise, a successful customer service track record, and top-tier customer value. As a Gold Certified Independent Software Vendor (ISV), Solvusoft is able to provide the highest level of customer satisfaction through delivering top-level software and service solutions, which have been subject to a rigourous and continually-audited approval process by Microsoft.